Raketa’s MARS-3
Reference: N/ALimited to 50 Pieces WorldwideReleased July 12, 2021
| Category | Specification |
|---|---|
| Movement | Raketa 2624A |
| Movement Finishing | Anodizing, Laser Engravings, Neva Waves |
| Complications | Automatic with 24 hours; rotating bezel |
| Regulation | 4 Positions |
| Advertised Rate | -10 / +20 seconds per day |
| Power Reserve | 40 Hours |
| Frequency | 18,000 Vibrations Per Hour (2.5Hz) |
| Winding | Bi-Directional Automatic / Manual |
| Diameter (w/o crown) | 43mm |
| Height | 13.15mm |
| Strap Size | 22mm |
| Water Resistance | 20 ATM |
| Glass | Sapphire |
| Caseback | Display- Mineral Glass |
| Lume | Superluminova |
| Crown | Screwed-in |
| Lug-To-Lug | N/A |
| Dial | Brass with deep laser engraving & etching |
Time on any planet!
Joining forces with Raketa, the Mars-3 is inspired by the Russian Mars-3 lander, which set foot on the red planet’s surface on December 2nd 1971. Using the same 43mm wide and 13.15mm tall steel case as the Space Launcher, the Mars-3 also comes with a bidirectional rotating bezel. It is engraved with an ingenious scale to keep track of a Martian day, called a Sol. Since a Sol measures 24 hours, 39 minutes and 35 seconds in Earth-time.
Source: The Limited.co.uk Coverage
